| Specification | | | | | | CE RoHS BIS |
| Model | JSSF-12150 | JSSF-24150 |
| Output | DC voltage | 12VDC | 24VDC |
| Current range | 12.5A Max | 6.25A Max |
| Rated load | 150W | 150W |
| Ripple&noise | ≤100mVp-p | ≤100mVp-p |
| Voltage tolerance | +/-2% |
| load regulation | ≤2% |
| hold-up/start-up time time | 100ms, 30ms,20ms/ 230VAC |
| Efficiency | ≥85% |
| Input | AC voltage | 180-240VAC |
| input current | 2A max |
| frequency | 50-60Hz |
| power factor | No |
| Quiescent current | <10mA/230VAC |
| Protection | over load | Above 105% |
| power limiting, recovers automatically after fault removed |
| over voltage | Above Max. Voltage |
| voltage limiting, recovers automatically after fault removed |
| over temperature | Above 130℃ |
| constant current limiting, recovers automatically after fault
removed |
| short circuit | auto resume |
| Environment | Operating Temp | ‘-30℃~~+50℃ |
| Tc | 80℃ |
| Storage temp | ‘-40℃~~+80℃ |
| humidity | 20%-95%RH |
| Safety&EMC | safety standards | EN61347-1;EN61347-2-13;SELV |
| withstand voltage | I/P-O/P: 1.5KVAC/1min; I/P-F/G: 1.5KVAC/1min;O/P-F/G: 0.5KVAC/1min; |
| EMC | EN55015:2013; GB9254 |
| LVD | EN61347-2-13:2006/AC:2010 |
| Others | Casing Material | Aluminium case |
| Cooling Method | Free air ventilation |
| Dimmension | 210*71*46mm |
| packing | 1.2kg/pcs, 20pcs/CTN |
| Note | ◊ All parameters NOT specially mentioned are measured at 240VAC
input, max rated load and 25℃ of ambient temperature |
| ◊ Ripple & Noise are measured at 20MHz of bandwidth by using a
300mm twisted pair-wire terminated with a 0.1uF & 47 uF parallel
capacitor. |
| ◊The driver is considered as a component to be operated in
combination with equipment,since performance will be affected by
the complete installation. |
| ◊ Good heat dissipation will prolong the working life of the
driver.Please ensure good ventilation. |
| ◊Please check if the output voltage of any LED lights used comply
with the working voltage of the product. |
| ◊ Be ware of high power pressure may caused by short circut when
installing metal casing products. |
| ◊ Please ensure all wires connections and polarities are correct
before appling power to avoid any damages to LED Lights. |
| ◊ The product shall be installed and serviced by a qualified
person. |
| ◊Please contact supplier if a fault occurs. |
Waterproof LED Power supply Mainly use for Outdoor LED Signs , LED
Strips 5050, LED Down lights, LED Garden lights, LED Floodlights
and so on. If you have any inquiry, please contact us freely
♦♦ Our Service
1. Your inquiry related to our products or prices will be replied in 24hrs;
2. Well-trained and experienced staffs to answer all your enquires in fluent English;
3. OEM&ODM, any your customized lightings we can help you to design and put
into product;
4. Distributoership are offered for your unique design and some our
current models;
5. Protection of your sales area, ideas of design and all your private
informaton
6. Provide lifelong warranty for long-term cooperation.
7. After you buy this product, we will provide you with attentive after-sales service. Our engineers will carefully guide the installation and usage for
you. That will includes connection of the controller and the light,
and also the control software.
FAQ
1. Q: When can I get the price?
A: We usually quote within 24 hours after got your inquiry. If you
are urgent to get the prices,
please call us or tell us in your email so that we will give
priority to your inquiry .
2, Q: Do you accept the OEM&ODM?
A: Yes,OEM or ODM service are available.
3, Q: May I get samples to test quality and how long can I get
them?
A: Yes, quote of sample is same as normal order and can be ready in
3-5 days.
4, Q: What is the MOQ?
A: One piece is OK. Because any order is from sample.
5, Q: Can you accept small trial order?
A: Yes, no matter large or small trial order, your needs will get
our full attention. It’s our great honor to cooperate with you.
